Ram Audio W 12000 - PA Power Amplifier 2 x 5900 W 2 Ohms

Item number: 47914

PA Endstufe 2 x 5900 W 2 Ohm

Category: Amplifiers

3.649,00 €

including 19% VAT. , no shipping costs (Paketversand)

Recommended retail price: 3.838,00 €
(You save 4.92%, that is 189,00 €)
on order

Shipping time: 5 - 8 workdays


High End High-Power Amplifiers

Utilizing state-of-the-art technology RAM Audio introduces the W Series 2 and 4-channel high end power amplifiers with output ratings up to 12 kW . Dual PFC QuantaPulse switched-mode power supplies provide increased, smooth output irrespective of mains fluctuations. Housed in 46 cm deep, 2U rackmountable reinforced steel chassis the 7 high-power models are easily portable weighing in at 10 - 12 kg only.

The W Series features Neutrik XLR and Speakon connectors, a large blue LCD user interface and 13-detent digital encoders for convenient gain, bridge mode, input link and ICL setting. A DSP loudspeaker management system is optionally available.

    Main Features
  • high-efficiency power amplifiers with up to 12 kW RMS output power
  • regulated PFC QuantaPulse dual switch-mode power supply
  • digital control with large blue LCD interface
  • temperature and output level indication
  • USB port for firmware updates and DSP control
  • gain, bridge mode, input links and ICL configurable via 13-detent digital encoders on the front panel
  • RAM Audio power management system (PMS)
  • high-efficiency oversized output transistors for maximum reliability under extreme operating conditions
  • easily removable front panel for dust filter cleaning, Neutrik XLR and Speakon connectors 

PMS?: a complete Power Management System that monitors the essential parameters for safe operation. It precisely controls the power supply to the amplifier and output power under extreme and dangerous conditions:

  • if the internal operating temperature approaches emergency shutdown during irregular operating conditions,
  • if the power supply draws excessive current under laboratory conditions or during extended acoustic feedback.

ICL?: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions.

QuantaPulse? Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.

Technical Specifications:

  • Product type: Power amplifier
  • Type: 2-channel
  • Output power (1 kHz @ 2 ohms): 2 x 5900 W
  • Output power (1 kHz @ 4 ohms): 2 x 3100 W
  • Output power (1 kHz @ 8 ohms): 2 x 1600 W
  • Output power (1 kHz @ 4 ohms, bridged mode): 11800 W
  • Output power (1 kHz @ 8 ohms, bridged mode): 6200 W
  • High Z (100Vrms / 140Vpeak) 2 x 5900 W
  • Circuit concept: Class H
  • Frequency response: 20 - 20,000 Hz
  • THD:
  • S/N ratio: 116 dB
  • Damping Factor: > 500
  • Crosstalk: > 80 dB
  • Voltage gain: 26 - 38 dB
  • Input sensitivity: 5.7 dB / 2.8 dB / 1.4 dB
  • Input impedance: unbalanced 10 kohms, balanced 20 kohms
  • Protection: Soft start, power on/off transients, power on muting, overheating, DC voltage, high frequency, short circuit, open outputs, and speaker load mismatching
  • Controls: Power, 2 x volume, dual/bridge switch
  • Indicators: Clipping, ready, signal, temperature, fault
  • Line input connectors: 2 x XLR
  • Line output connectors: 2 x XLR
  • Speaker output connections: 2 x Speakon
  • Cooling system: fan
  • Power supply: 230 V
  • Power consumption @ full load: 13 A
  • Width: 483 mm
  • Height: 89 mm
  • Depth: 460 mm

Channels: 2-Channel
Power Output at 4 Ohms: above 2000 W
Shipping weight: 12,01 Kg

Average product review

Write your first review and help others with their purchase decision: