Palmer Pro PLI 04 - Media DI Box 2 Channel for PC and Laptop

Item number: 60503

Category: Audio Tools

159,00 €

including 19% VAT., no shipping costs (Paketversand)

Recommended retail price: 196,00 €
(You save 18.88%, that is 37,00 €)

Shipping time: 4 - 7 workdays



PRO MEDIA DI/ PLI-04. With the new PRO MEDIA DI/ PLI-04, Palmer introduces a DI-box, produced with the discerning needs of the computer-age media in mind. Using this uncomplicated method, personal computers and other consumer equipment with unbalanced outputs can be converted to balanced, in order to carry out, e.g., a presentation over a professional PA system. The PLI-04 accommodates all the common input types, TRS jacks accepting mono or stereo plugs, RCA phono sockets and a 3.5mm stereo jack input for use with the headphone output of a Laptop or similar device. The outputs are conventional transformer balanced XLR sockets, as used in professional PA systems, guaranteeing an electrically decoupled signal, a prerequisite to ensure noise-free operation. One other special feature which should not be forgotten! Although the PLI-04 is primarily a stereo unit, it can be switched to mono, with the two stereo signals summed and fed to both XLR outputs. The PLI-04 manifests a mechanically robust unit combined with outstanding technical specifications, adding to the list of high quality products that have come to be expected from Palmer.

PLI04 Specifications:


  • 2x 6.3mm TRS-Jack
  • Tip= +phase (hot)
  • Ring= -phase (cold)
  • Sleeve= screening
  • Ground
  • 2x RCA phono sockets 
  • 1x 3.5mm stereo jack
  • Input Impedance: 6 kohms at 600 ohms
  • Load Input Level: 6dBu @ 30Hz/0.05%THD 16dBu @30Hz/0.33%THD (All measurements taken with 200 ohms source)


  • 2x XLR male
  • Pin 1 ground
  • Pin 2 pos. phase (hot)
  • Pin 3 neg. phase (cold)
  • Transformer balanced
  • Output Impedance: 600 ohms
  • Gain reduction input to output: 10dB
  • Transformer ratio: 3.16 : 1
  • Frequency response: 20Hz - 20kHz ± 0.5dB
  • Phase response: less than 3°degree deviation
  • Mono switch 3 position ground lift switch: lift, ground, soft ground
  • Aluminium die cast housing: 125 x 95 x 35 mm

Shipping weight: 0,71 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: