P-Audio E12-350N

Item number: 47660

12" Neodym Tieftmittelöner 8Ohm
350W AES power handling 
76 mm (3 in) voice coil
95dB sensitivity

Category: PA speakers

119,00 €

including 19% VAT., no shipping costs (Paketversand)


Shipping time: 5 - 8 workdays



P-Audio E12-350N 12" 350W 8 Ohm Neodymium Loudspeaker Driver


P-Audio's truly outstanding E-series drivers represent excellent value for money - and we're so confident in them, we're prepared to back them up with a three year warranty for all of our UK mainland sales. The E12-350N is ideal for uprating your mid-highs or monitor wedges, and weighing in at only 3.7kg (that's half the weight of a comparable ferrite magnet driver) this will help make a massive weight saving in your equipment. Even with Neodymium prices soaring into the stratosphere, we can offer this driver at an unbeatable price.

The P-Audio E12-350N is a high output full range/mid bass transducer. The E12-350N is an upgraded design that features many of P-Audio's new technologies and performance upgrades. The 12 inch (305mm) diameter piston will produce extremely high sound pressure levels at full range frequencies and is ideal for high level full range response in both live sound and recorded music venues This transducer is ideal when used in a two way system where the E12-350N is the low frequency device.

The operating bandwidth of the E12-350N is 60Hz to 3000Hz. The transducer uses very high energy neodymium based magnetics to achieve a very high acoustic output to weight ratio. The E12-350N employs a medium format 3 inch (76.2mm) diameter voice coil that provides an AES rated 350 watts of continuous power handling and a full 1400 watts of peak rated power handling when sufficient amplifier headroom is available.

The E12-350N utilises P-Audio's under damper venting technology to improve transducer air flow and reduce turbulence under the damper and around the voice coil. The voice coil design is a bobbin wound geometry with P-Audio's precision round wire technology to maximise system conversion efficiency. The suspension has been designed specifically for high linear displacement and extended low frequency response. The suspension has been designed specifically for high linear displacement and extended low frequency response.



  • Nominal diameter 12"
  • Power rating 350 W(AES)
  • Nominal impedance 8
  • Sensitivity 95 dB
  • Frequency range 60-3000 Hz
  • Chassis type Heavy Duty Stamp Steel
  • Magnet type Neodymium
  • Magnet weight 230g
  • Voice coil diameter 3"
  • Coil material CCA-W
  • Former material Kapton
  • Cone material Paper
  • Surround material Cloth
  • Suspension Single
  • X-max 4.4mm
  • Gap depth 6mm
  • Voice coil winding width 16.8mm
  • Net Weight 3.0kg
  • Overall diameter 312mm
  • Baffle cutout diameter 279mm
  • Mounting depth 142.1mm
  • Mounting hole PCD 300mm
  • Packing Dimension WxDxH 335 x 335 x 195mm
  • Shipping Weight 3.7kg


Thiele Small Parameters:


  • Re 5.8 Ohms
  • Fs 64 Hz
  • Mms 50.1g
  • Mmd 43.46g
  • Qms 6.86
  • Qes 0.55
  • Qts 0.51
  • Vas 44.94 lt
  • Bl 14.66 Tm
  • Cms 1.2e-04 m/N
  • Rms 2.97 Ns/m
  • Le (at 1kHz) 0.46 mH
  • Sd 511 cm2

application: Midbass
Size: 12 Zoll
Impedance: 8 Ohm
Shipping weight: 3,70 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: