P-Audio 15BM-500B

Artikelnummer: 47683

15" Ferrit Tieftmittelöner 8Ohm
500W AES power handling 
83,3 mm (3,28 in) voice coil
97dB sensitivity

Kategorie: PA-Chassis

148,75 €

inkl. 19% USt., kostenfreie Lieferung (Paketversand)


Lieferzeit: 7 - 10 Werktage



P-Audio 15BM-500B 15" 500W Low Frequency Speaker Driver


P-Audio's 15BM-500B is designed as a high-power bass-mid driver for use in two and three way systems. In addition to being able to handle a continuous power of 500W AES, the 15BM-500B has an exceptionally wide useable frequency range, from 45Hz up to 3500Hz.

The P Audio 15BM-500B is a high output wide bandwidth transducer. The 15BM-500B is a highly upgraded design that features many of P Audio's new technologies and performance upgrades. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer has a rated bandwidth of 45Hz to 3500Hz. The transducer uses high energy ferrite magnetics to achieve a very high acoustic output to weight ratio. The 15BM-500B has been optimized for use in two way or three way sound reinforcement systems.

The 15BM-500B employs a medium format 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 500 watts of continuous power handling and a full 2000 watts of peak rated power handling when sufficient amplifier headroom is available. The 15BM-500B utilizes P Audio's Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.

The voice coil design is a bobbin wound geometry with P Audio's precision round wire technology in an inside/outside geometry to ensure very high conversion efficiency. The P Audio square wire technology and inside/outside winding configuration provides a very large cross-sectional area that substantially improves system cooling and reduces power compression.

The system suspension has been designed specifically for high linear displacement and extended low frequency response. The 15BM-500B also features a single spider configuration that provides system reliability and mechanical control.

The transducer chassis is a die cast aluminium design that ensures a very high degree of structural integrity.



  • Nominal diameter - 381 mm/15 in
  • Power rating - 500 W(AES)
  • Nominal impedance - 8 Ohm
  • Sensitivity - 97 dB
  • Frequency range - 45-3500 Hz
  • Chassis type - Cast aluminum
  • Magnet type - Ferrite
  • Magnet weight - 2.9 kg/103.9 oz
  • Voice coil diameter - 83.3 mm/3.28 in
  • Coil material - CCA-W
  • Former material - Glass fiber
  • Cone material - Paper
  • Surround material - Cloth
  • Suspension - Single
  • X-max - 4.8 mm/0.19 in
  • Gap depth - 10.0 mm/0.39 in
  • Voice coil winding width - 19.6 mm/0.77 in
  • Net Weight - 10.2 kg/22.5 lb
  • Packing Dimension WxDxH (mm) - 430mm x 430mm x 220mm
  • Shipping Weight - 1 1.3 kg/24.9 lb


Small Signal Parameters


    • Re - 5.5 Ohm
    • Fs - 41 Hz
    • Mms - 90.0 g/3.17 oz
    • Mmd - 74.95 g/2.64 oz
    • Qms - 4.21
    • Qes - 0.41
    • Qts - 0.37
    • Vas - 183.44 lt/6.48 ft
    • BI - 17.76 Tm
    • Cms - 1.7e-04 m/N
    • Rms - 5.51 Ns/m
    • Le (at 1kHz) - 0.43 mH

Anwendung: Tief-/Mittelton Subwoofer
Größe: 15 Zoll
Impedanz: 8 Ohm
Versandgewicht: 11,30 kg

Bewertungen (0)

durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung: