Item number: 10035

different Types of Inductors to choose

Category: Inductors


starting from 2,00 €

including 19% VAT., plus shipping (Paketversand)

Recommended retail price: 2,00 €
9 piece In stock

There are variations of this item. Please select the variation you wish.


Please choose above the requested Type of Coil , Wire dimension and Inductance.


  • extremely low distortion air core coil with 0.71 up to 1.4 mm wire
  • Specifications:
  • Conductor: 99.99% Oxygen-free Copper.
  • Insulation: Type V Enamel.
  • Bobbin material: ABS
  • Dimensional stability: 85°C.
  • Inductance values tested at 1KHz / 25°C
  • Inductance tolerance: +/- 5%.
  • Connecting leads: 40mm (values greater than 1.80mm not tinned)


Excellent core saturation performance
Superior grade iron dust core inductors are automatically wound with OFC wire. They boast low E.S.R. and high power handling. The use of an iron dust material greatly reduces the wire length for a specific inductance, subsequently providing a lower DC resistance, greater damping of drive units and improved signal integrity. Large sized cores are used so that saturation at higher listening levels is negligible. The reduction of resistance in the signal path combined with a high grade wire provides a good improvement over ferrite and air core types, which by comparison sound dull and lifeless. Notable improvements include greater efficiency & dynamics, tighter, cleaner bass, and the tonal balance of mid-high frequencies is more lifelike

A coil with very extreme power handling, consisting of granular aligned silicon sheet iron with high saturation current. Best for professional use.

  • Conductor: 99.99% Oxygen-free Copper. Round enamelled wire.
  • Insulation: Type V Enamel.
  • Bobbin material: Polyamid
  • Dimensional stability: 85°C.
  • Inductance values tested at 1KHz / 25°C
  • Inductance tolerance: +/- 5%.
  • Connecting leads: 50mm; last 20mm left uninsulated.
  • Core type: Bar-core made from grain-oriented silicon iron laminations.
  • Applications: High power systems such as in-car hi-fi or PA systems.
  • These high-power-handling inductors offer extremely low distortion, well below 0.1% at their rated power, typically 0.01% - 0.05% (100 Hz - 5KHz)

Ferrobar Ferrite Core Coils

The design of this coil type is similar to the air core coil, except that it contains a soft, special high quality ferrite core. The magnetisation curve is linear at small to medium volumes. This coil type is suitable to confined conditions where large air core coil won't have enough space. 
  • Conductor: 99.99% Oxygen-free Copper,
  • Insulation: Type V Enamel,
  • Bobbin material: AB,
  • Dimensional stability (Shape retention): 85oC,
  • Inductance values tested at: 1 kHz/25oC,
  • Inductance tolerance: +/-5%,
  • Connecting leads: 10/40/50mm long (tinned: 9/35/45mm),
  • Core type: Bobbin style,
  • Core material: Ferrobar
  • Inductors HQ43/45 & 58/56 can be mounted upright or on their side.

Shipping weight: 0,02 Kg

Ratings (0)

Average product review

Write your first review and help others with their purchase decision: