18Sound 10NMB420 8 Ohm

Artikelnummer: 46171

Kategorie: Eighteensound


195,00 €

inkl. 19% USt. , kostenfreie Lieferung (Paketversand)

UVP des Herstellers: 249,00 €
(Sie sparen 21.69%, also 54,00 €)
Bestellartikel

Lieferzeit: 7 - 10 Werktage

Stück



Description
The 10NMB420 neodymium transducer has been developed in response to a specific market requirement for a 10" midbass driver that combines excellent linearity with good efficiency and high power handling capabilities. The 10NMB420 is primarily intended for use as a midbass driver in line-arrays as well as high quality 2-way or multiway reflex enclosures. The low pass filter might be positioned as high as 2000Hz. The extremely powerful external neodymium magnet assembly assures high flux concentration, low power compression and excellent heat exchange. The levels of force factor and power handling are, as a consequence, at the upper professional level with best power to weight ratio. The 65mm Ø state-of-the-art, aluminum wire voice coil employs Interleaved Sandwich Voice coil (ISV) technology. It is composed by a high strength fiberglas former used to carry windings on both the outer and inner surfaces, in order to achieve a mass balanced coil. This results in an extremely linear motor assembly which, in conjunction with the highly advanced design of the magnetic structure, provides a high BL force factor. The voice coil is cooled through airways placed between the chassis back plate and the magnet faceplate. In this way heated air is channeled away from the voice coil and the gap. Another technology present into the 10NMB420 is the SDR (Single Demodulating Ring), used to reproduce instantaneous peak on mid frequencies, reducing intermodulation distortion. Thanks to the increasing use during outdoor audio events, the ability to perform in humid environments is an extra key feature of the 10NMB420. This is achieved trough an exclusively developed cone treatment which renders the cone humidity repellent while does not increasing the total moving speaker mass.


General Specifications
  • Nominal Diameter  260mm (10 in)
  • Rated Impedance  16 Ohm
  • AES Power  350 W
  • Program Power  500 W
  • Peak Power  1000 W
  • Sensitivity  99 dB
  • Frequency Range  65 ÷ 5000 Hz
  • Power Compression @-10dB  0,8 dB
  • Power Compression @-3dB  2,2 dB
  • Power Compression @Full Power  2,9 dB
  • Max Recomm. Frequency  2000 Hz
  • Recomm. Enclosure Volume 10 ÷ 40 lt. (0,35 ÷ 1,41 cuft)
  • Minimum Impedance 11,9Ohm at 25°C
  • Max Peak To Peak Excursion  25 mm (1 in)
  • Voice Coil Diameter  65 mm (2,5 in)
  • Voice Coil Winding Material  aluminum
  • Suspension  M-roll, Polycotton
  • Cone  Curvilinear, Treated paper

Thiele Small Parameters

  • Fs  65 Hz
  • Re  10,5 Ohm
  • Sd  0,0346 sq.mt. (53,6 sq.in.)
  • Qms  4,6
  • Qes  0,36
  • Qts  0,33
  • Vas  30 lt. (1,06 cu.ft.)
  • Mms  31,5 gr. (0,07 lb)
  • BL  19,5 Tm
  • Linear Mathematical Xmax  ± 4 mm (±0,16 in)
  • Le (1kHz)  0,4 mH
  • Ref. Efficiency 1W@1m (half space)  96 dB
  • Mounting information
  • Overall diameter  260 mm (10,24 in)
  • N. of mounting holes and bolt  8
  • Mounting holes diameter  7 mm (0,27 in)
  • Bolt circle diameter  244 mm (9,6 in)
  • Front mount baffle cutout ø  232 mm (9,1 in)
  • Rear mount baffle cutout ø  232 mm (9,1 in)
  • Total depth  122 mm (4,8 in)
  • Flange and gasket thickness  11 mm (0,43 in)
  • Net weight  3 kg (6,6 lb)
  • Shipping weight  3,5 kg (7,7 lb)
  • CardBoard Packaging dimensions  275 x 275 x 164 mm (9,25 x 9,25 x 5,91 in)

Anwendung: Tief-/Mittelton
Größe: 10 Zoll
Impedanz: 8 Ohm
Versandgewicht: 3,50 kg

durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Kontaktdaten