P-Audio SN6-150MB 150W 6 inch Driver 8 Ohm

Item number: 47506

Category: P-Audio


Now only 37,90 €

including 19% VAT., plus shipping (Paketversand)

Old price: 39,90 €
Discount: 5%
Available now!

Shipping time: 7 - 10 workdays

piece


Description


Technical Data SN6-150MB:

Nominal Diameter 6 inch / 165 mm
Voicecoil Diameter: 1,75 inch / 44,5 mm 
Fs: 71 Hz 
Power rating AES: 150W
Impedance 8 Ohm
Sensivity 1W/1m: 90dB
Xmax: 3 mm
Qts: 0,37
VAS: 11,20 l
Mms 12,88g
Magnetics: Ferrit 
Weight: 1,8 kg

more Information in "Technical Data" and "Media + Downloads"


application: Midbass
Size: 6 - 6.5 Zoll
Impedance: 8 Ohm
Shipping weight: 2,00 Kg

Technical Data

P-Audio SN6-150MB 150W 6" Driver 8 Ohm


The P Audio SN6-150MB is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-150MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-150MB has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-150MB features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-150MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The cone suspension is a high internal damping rubber design. The transducer chassis is a die cast aluminum design that ensures a very high degree of structural integrity.


General Specifications:


  • Nominal diameter - 165 mm/6.5 in
  • Power rating - 150 W(AES)
  • Nominal impedance - 8
  • Sensitivity - 90 dB
  • Frequency range - 80-3000 Hz
  • Chassis type - Cast aluminum
  • Magnet type - Ferrite
  • Magnet weight - 2.6 kg/92.1 oz
  • Voice coil diameter - 44.5 mm/1.75 in
  • Coil material - SV-W
  • Former material - Kapton
  • Cone material - Paper
  • Surround material - Rubber
  • Suspension - Single
  • X-max - 3 mm/0.12 in
  • Gap depth - 6 mm/0.24 in
  • Voice coil winding width - 12 mm/0.47 in
  • Net Weight - 1.8 kg/4.0 lb
  • Packing Dimension WxDxH - 175 x 175 x 175 mm
  • Shipping Weight - 2.0 kg/4.4 lb


Small Signal Parameters:


  • Re - 5.5
  • Fs - 71 Hz
  • Mms - 12.88 g/0.45 oz
  • Mmd - 11.91 g/0.42 oz
  • Qms - 5.17
  • Qes - 0.40
  • Qts - 0.37
  • Vas - 11.20 lt/0.40 ft
  • BI - 8.94 Tm
  • Cms - 3.9e-04 m/N
  • Rms - 1.11 Ns/m
  • Le (at 1kHz) - 0.42 mH
  • Sd - 143 cm2

Ratings (0)

Average product review

Write your first review and help others with their purchase decision:

Notify me when this product is available