P-Audio SN6-150MB 150W 6" Lautsprecher 8 Ohm

Artikelnummer: 47506

Kategorie: P-Audio


jetzt nur 37,90 €

inkl. 19% USt., zzgl. Versand (Paketversand)

alter Preis: 39,90 €
Rabatt: 5%
WIrd für Sie bestellt. Ab Bestellung lieferbereit in 3 Tagen.

Lieferzeit: 7 - 10 Werktage

Stück


Beschreibung

Technische Daten  SN6-150MB:

Durchmesser 6 Zoll / 165 mm
Schwingspulen-Durchmesser : 1,75 Zoll / 44,5 mm
Resonanzfrequenz Fs: 71 Hz
Belastbarkeit AES: 150W
Impedanz 8 Ohm
Empfindlichkeit 1W/1m: 90dB
Xmax: 3 mm
Qts: 0,37
VAS: 11,20 L
Mms 12.88 g
Magnetmaterial: Ferrit
Gewicht: 1,8kg

weitere Informationen in den Tabs "Technische Daten" und "Media + Downloads"

 


Anwendung: Tief-/Mittelton
Größe: 6 Zoll
Impedanz: 8 Ohm
Versandgewicht: 2,00 kg

Technische Daten

P-Audio SN6-150MB 150W 6" Driver 8 Ohm


The P Audio SN6-150MB is a high performance wide bandwidth transducer optimized for use in mid bass frequencies. The SN6-150MB is an upgraded design that features many of P Audios new technologies and performance upgrades. The 6.5 inch (165mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN6-150MB has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 80Hz to 3000Hz. The SN6-150MB features a 1.75 inch (44.5mm) diameter voice coil that provides an AES rated 150 watts of continuous power handling and a full 600 watts of peak rated power handling when sufficient amplifier headroom is available. The SN6-150MB utilizes P Audios Auto Balanced Cooling (ABC) technology to not only improve transducer power handling and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas. The voice coil design is a bobbin wound geometry with P Audios precision round wire technology to maximize system conversion efficiency. The cone suspension is a high internal damping rubber design. The transducer chassis is a die cast aluminum design that ensures a very high degree of structural integrity.


General Specifications:


  • Nominal diameter - 165 mm/6.5 in
  • Power rating - 150 W(AES)
  • Nominal impedance - 8
  • Sensitivity - 90 dB
  • Frequency range - 80-3000 Hz
  • Chassis type - Cast aluminum
  • Magnet type - Ferrite
  • Magnet weight - 2.6 kg/92.1 oz
  • Voice coil diameter - 44.5 mm/1.75 in
  • Coil material - SV-W
  • Former material - Kapton
  • Cone material - Paper
  • Surround material - Rubber
  • Suspension - Single
  • X-max - 3 mm/0.12 in
  • Gap depth - 6 mm/0.24 in
  • Voice coil winding width - 12 mm/0.47 in
  • Net Weight - 1.8 kg/4.0 lb
  • Packing Dimension WxDxH - 175 x 175 x 175 mm
  • Shipping Weight - 2.0 kg/4.4 lb


Small Signal Parameters:


  • Re - 5.5
  • Fs - 71 Hz
  • Mms - 12.88 g/0.45 oz
  • Mmd - 11.91 g/0.42 oz
  • Qms - 5.17
  • Qes - 0.40
  • Qts - 0.37
  • Vas - 11.20 lt/0.40 ft
  • BI - 8.94 Tm
  • Cms - 3.9e-04 m/N
  • Rms - 1.11 Ns/m
  • Le (at 1kHz) - 0.42 mH
  • Sd - 143 cm2

Bewertungen (0)

durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Benachrichtigen, wenn lieferbar.