P-Audio SN15-500CX

Artikelnummer: 45900

15" Coax 8Ohm
500W AES power handling 
82,5 mm (3,25 in) voice coil
97dB sensitivity

Kategorie: P-Audio

357,00 €

inkl. 19% USt., kostenfreie Lieferung (Paketversand)

WIrd für Sie bestellt. Ab Bestellung lieferbereit in 3 Tagen.

Lieferzeit: 5 - 8 Werktage



P-Audio SN15-500CX 15" 500W 8 Ohm Coaxial Loudspeaker Driver

P-Audio's SN15-500CX coaxial driver gives everything you need in a single, elegant package, covering from 55Hz right up to 20kHz in a 15" diameter footprint - and outpunches drivers costing two and a half times the price. This driver, paired with a suitable crossover network, is absolutely ideal for ultra-compact, lightweight monitor wedges, and can perform in box sizes as low as 40 litres.

The P-Audio SN15-500CX is a high performance coaxial transducer. The SN15-500CX is an upgraded design that features many of P Audio's new technologies and performance upgrades. The low frequency section utilises a large diameter voice coil design while the high frequency section employs a medium format titanium diaphragm assembly. The 15 inch (381mm) diameter piston will produce extremely high sound pressure levels at both low and mid band frequencies and is ideal for high level response in both live sound and recorded music venues. The transducer uses very high energy neodymium magnetics to achieve a very high acoustic output to weight ratio. The SN15-500CX has been optimized for use in two way or three way sound reinforcement systems and has an operating range of 55Hz to 20000Hz.

The SN15-500CX features a large 3.28 inch (83.3mm) diameter voice coil that provides an AES rated 600 watts of continuous power handling and a full 2400 watts of peak rated power handling when sufficient amplifier headroom is available. The SN15-500CX employs P-Audio's under damper venting to control turbulent air flow. The voice coil design is a bobbin wound geometry with P-Audio's precision round inside/ outside wire technology to improve conversion efficiency and provide a large cross-sectional area for superior cooling. The high frequency section is a close spaced titanium diaphragm assembly. The diaphragm is a 2.5 inch (63.5mm) diaphragm that provides excellent high frequency response and superior power handling and durability. The horn loading is provided via a thru pole piece configuration The overall high frequency design provides very high sensitivity. The transducer chassis is a die cast aluminium design that insures a very high degree of structural integrity.


  • Nominal diameter: 381 mm/15 in
  • Power rating: 600 W(AES)
  • Nominal impedance: 8
  • Sensitivity: 97 dB
  • Frequency range: 55-20000 Hz
  • Chassis type: Cast aluminium
  • Magnet type: Neodymium
  • Magnet weight: 0.58 kg/20.5 oz
  • Voice coil diameter: 82.5 mm/3.25 in
  • Coil material: CCA-W
  • Former material: Glass fiber
  • Cone material: Paper
  • Surround material: Cloth
  • Suspension: Single
  • X-max: 4.8 mm/0.19 in
  • Gap depth: 10 mm/0.39 in
  • Voice coil winding width: 19.6 mm/0.77 in
  • Net Weight: 5.8 kg/12.8 lb
  • Packing Dimension WxDxH: 430 x 430 x 250 mm
  • Shipping Weight: 7.2 kg/15.9 lb

Small Signal Parameters:

  • Re: 5.5 Ohms
  • Fs: 50 Hz
  • Mms: 91.46 g/3.23 oz
  • Mmd: 77.08 g/2.72 oz
  • Qms: 5.84
  • Qes: 0.43
  • Qts: 0.4
  • Vas: 116.02 lt/4.1 ft
  • Bl: 19.21 Tm
  • Cms: 1.1e-04 m/N
  • Rms: 4.83 Ns/m
  • Le (at 1kHz): 0.46 mH
  • Sd: 855 cm2

Anwendung: Coax
Größe: 15 Zoll
Impedanz: 8 Ohm
Versandgewicht: 7,20 kg

Bewertungen (0)

durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Benachrichtigen, wenn lieferbar.