BMS 4592 ND - 2" Coaxial Neodym Treiber 150 W + 80 W

Artikelnummer: 45807

Kategorie: BMS HF Treiber


ab 577,15 €

inkl. 19% USt., kostenfreie Lieferung (Paketversand)

alter Preis: 595,00 €
Rabatt: 3%
UVP des Herstellers: 830,00 €
(Sie sparen 30.46 %, also 252,85 €)
WIrd für Sie bestellt. Ab Bestellung lieferbereit in 14 Tagen.

Dieses Produkt hat Varianten. Wählen Sie bitte die gewünschte Variante aus.


  • Extended Bandwidth (300 - 22000 Hz)
  • Neodymium Magnet Assembly
  • With two subsystems in one, each Driver covers a smaller Frequency Range for increased Power Handling, high Dynamic and extremely low Distortion
  • Excellent Phase Coherence
  • Perfect Time Alignment without Problems of Multi-Source Interference
  • Ultra light Weight

The patented design of the BMS 4592 is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm
covers the frequency range between 300 and 7000 Hz with a smooth, linear response. The large diaphragm excursion of max. + / - 0,8 mm results in high output and increased
power handling up to 1300 W peak.

The ultra light annular diaphragm for the high range offers exceptional transient response with very high efficiency from 6 to 22 kHz. The unique voice coil technology employs a light weight Copper Clad Aluminium wire wound inside and outside of the Kapton? former to improve the heat dissipation, dramatically increasing the acoustic output and reliability of the driver while minimises the power compression. The use of high grade neodymium magnets provide improved performance while significantly reducing transducer weight.

Throat diameter: 2" (50.8 mm)
Nominal impendance: 8 or 16 Ohm
Power capacity:  
Middle Range (AES): 150 W AES above 400 Hz
Peak: 1000 W peak above 500 Hz
High Range (AES): 80 W
Peak: 320 W
Sensitivity 1 W / 1 m: 118 dB on 2242 Horn
Frequency Range: 300 - 22000 Hz
Recommended Crossover: 300 Hz
Middle Frequency Range: 300 - 7000 Hz
High Frequency Range: 6000 - 22000 Hz
Middle / High Crossover: 6300 Hz
Voice Coil High-Range: 1.75" (44.4 mm)
Voice Coil Mid-Range: 3.5" (90 mm)
Magnet Material: Neodymium
Flux Density Mid-Range (Tesla): 1.95
Flux Density High-Range (Tesla): 2.0
Efficiency: 35 % (300 - 5000 Hz)
Voice Coil Material: Copper Clad Aluminum
  (2 Layers in- and outside of the VC)
Voice Coil Former: Kapton TM
Diaphragm Material: Polyester

Anwendung: Hochton Mittel-/Hochton
Anschlußart: Flansch-Montage
Größe: 2 Zoll
Impedanz: 16 Ohm 8 Ohm
Versandgewicht: 2,90 kg

Bewertungen (0)

durchschnittliche Artikelbewertung

Geben Sie die erste Bewertung für diesen Artikel ab und helfen Sie Anderen bei der Kaufenscheidung:

Benachrichtigen, wenn lieferbar.